agilent hlmp-cxxx t-1 3 / 4 (5 mm) super bright precision optical performance ingan led lamps data sheet description these super bright precision optical performance led lamps are based on flip chip ingan material, which is the brightest and most efficient technology for leds in the blue, green, and cyan region of the spectrum. the 470 nm typical dominant wavelength for blue and 530 nm typical wavelength for green is well suited to color mixing in full color signs. the 500 nm typical dominant wavelength for cyan is suitable for traffic signal application. these led lamps are untinted, non-diffused, t-1 3| 4 packages incorporating second generation hlmp-cb18, hlmp-cb19, hlmp-cm18, hlmp-cm19, hlmp-ce18, hlmp-ce19, hlmp-cb28, hlmp-cb29, hlmp-cm28, hlmp-cm29, hlmp-ce28, hlmp-ce29, hlmp-cb38, hlmp-cb39, hlmp-cm38, hlmp-cm39, hlmp-ce38, hlmp-ce39 features ? well defined spatial radiation pattern high luminous output available in blue, green and cyan color viewing angle: 15, 23 and 30 standoff or non-standoff leads superior resistance to moisture new ingan flip chip die technology with protective diode esd class 3 applications traffic signals commercial outdoor advertising front panel backlighting front panel indicators optics producing well defined spatial radiation patterns at specific viewing cone angles. these lamps are made with an advanced optical grade epoxy, offering superior temperature and moisture resistance in outdoor signal and sign applica- tions. the high maximum led junction temperature limit of +130c enables high tempera- ture operation in bright sunlight conditions. the package epoxy contains both uv-a and uv-b inhibitors to reduce the effects of long-term exposure to direct sunlight.
2 package dimensions 1.14 0.20 (0.045 0.008) note 1 5.80 0.20 (0.228 0.008) 5.00 0.20 (0.197 0.008) 31.60 ( 1.244 ) min. 0.70 (0.028) 1.00 (0.039) min. 8.71 0.20 (0.343 0.008) 2.54 0.38 (0.100 0.015) 0.50 0.10 (0.020 0.004) sq. typ. ? cathode lead 2.35 (0.093) cathode flat max. max. package dimension a 5.80 0.20 (0.228 0.008) 2.54 0.38 (0.100 0.015) ? cathode flat 1.14 0.20 (0.045 0.008) note 1 5.00 0.20 (0.197 0.008) 31.60 (1.244) min. 1.50 0.15 (0.059 0.006) 1.00 (0.039) min. 8.71 0.20 (0.343 0.008) dimension h refer to table 1 0.50 0.10 (0.020 0.004) sq. typ. notes: 1. measured just above flange. 2. dimensions in millimeters (inches). dimension h: 23 & 30 degree = 12.67 0.25 mm (0.499 0.01 inch) 15 degree = 12.93 0.25 mm (0.509 0.01 inch) cathode lead 0.70 (0.028) max. package dimension b
3 device selection guide typical viewing intensity (cd) at 20 ma package part number color angle (degree) minimum typ.ical maximum standoff dimension hlmp-cb18-tw0xx blue 15 2.50 3.50 7.20 no a hlmp-cb19-tw0xx blue 15 2.50 3.50 7.20 yes b hlmp-cm18-x10xx green 15 7.20 12.0 21.0 no a hlmp-cm19-x10xx green 15 7.20 12.0 21.0 yes b hlmp-ce18-wz0xx cyan 15 5.50 11.8 16.0 no a hlmp-ce19-wz0xx cyan 15 5.50 11.8 16.0 yes b hlmp-cb28-ru0xx blue 23 1.50 2.40 4.20 no a hlmp-cb29-ru0xx blue 23 1.50 2.40 4.20 yes b hlmp-cm28-wz0xx green 23 5.50 9.30 16.0 no a hlmp-cm29-wz0xx green 23 5.50 9.30 16.0 yes b hlmp-ce28-vy0xx cyan 23 4.20 7.40 12.0 no a hlmp-ce29-vy0xx cyan 23 4.20 7.40 12.0 yes b hlmp-cb38-qt0xx blue 30 1.15 1.50 3.20 no a hlmp-cb39-qt0xx blue 30 1.15 1.50 3.20 yes b hlmp-cm38-ux0xx green 30 3.20 5.00 9.30 no a hlmp-cm39-ux0xx green 30 3.20 5.00 9.30 yes b hlmp-ce38-tw0xx cyan 30 2.50 3.90 7.20 no a hlmp-ce39-tw0xx cyan 30 2.50 3.90 7.20 yes b hlmp-cb18-uvaxx blue 15 3.20 5.50 3.20 no a hlmp-cb28-stdxx blue 23 1.90 - 3.20 no a hlmp-cb38-qraxx blue 30 1.15 - 1.90 no a hlmp-cb39-rsdxx blue 30 1.50 - 2.50 yes b hlmp-cm18-zvcxx green 15 9.30 - 16.0 no a hlmp-cm28-wxcxx green 23 5.50 - 9.30 no a hlmp-cm38-uvcxx green 30 3.20 - 5.50 no a hlmp-cm39-uvcxx green 30 3.20 - 5.50 yes b . notes: 1. tolerance for luminous intensity measurement is 15%. 2. the luminous intensity is measured on the mechanical axis of the lamp package. 3. the optical axis is closely aligned with the package mechanical axis. 4. led light output is bright enough to cause injuries to the eyes. precautions must be taken to prevent looking directly at the led with unprotected eyes.
4 ordering information hlmp - x x xx - x x x xx mechanical option 00: bulk dd: ammo pack color bin option 0: full color bin distribution a: color bin 1 & 2 only b: color bin 3 & 4 only c: color bin 4 & 5 only maximum intensity bin refer to device selection guide minimum intensity bin refer to device selection guide viewing angle and standoff option 18: 15 without standoff 19: 15 with standoff 28: 23 without standoff 29: 23 with standoff 38: 30 without standoff 39: 30 with standoff color b: blue 470 nm m: green 530 nm e: cyan 500 nm package c: t-1 3 | 4 (5 mm) round lamp absolute maximum ratings at t a = 25 o c parameter value unit dc forward current [1] 30 ma peak pulsed forward current [2] 100 ma average forward current 30 ma power dissipation 120 mw led junction temperature 130 o c operating temperature range ?40 to +85 o c storage temperature range ?40 to +100 o c ttw soldering temperature [3] 245 for 3 secs o c solder dipping temperature [3] 260 for 5 secs o c notes: 1. derate linearly as shown in figure 3. 2. duty factor 30%, 1khz. 3. 1.59 mm (0.060 inch) above seating plane.
5 electrical characteristics at t a = 25 o c blue green cyan parameters symbol min. typ. max. min. typ. max. min. typ. max. units test condition forward voltage v f 3.4 4.0 3.2 4.0 3.3 4.0 v i f = 20 ma capacitance c 53 53 53 pf v f = 0, f = 1 mhz viewing angle [1] cx18/cx19 2 1/2 15 15 15 deg i f = 20 ma cx28/cx29 23 23 23 cx38/cx39 30 30 30 reverse voltage [2] v r 0.6 0.6 0.6 v i r = 10 a thermal r j-pin 240 240 240 o c/w led junction to resistance cathode lead dominant d 460 470 480 520 530 540 490 500 510 nm i f = 20 ma wavelength [3] peak wavelength peak 466 523 495 nm peak of wavelength of spectral distribu- tion at i f = 20 ma spectral half ? 1/2 21 30 26 wavelength width at width spectral distribution power point at i f = 20 ma luminous v 62 588 220 lm/w emitted luminous efficacy [4] power/emitted radiant power notes: 1. 2q 1/2 is the off-axis angle where the luminous intensity is 1 | 2 the on axis intensity. 2. the reverse voltage of the product is equivalent to the forward voltage of the protective chip at i r = 10 a. 3. the dominant wavelength, l d , is derived from the chromaticy diagram and represents the color pf the lamp. 4. the radiant intensity, ie in watts/steradian, may be found from the equation ie = iv/h v , where iv is the luminous intensity in candelas and h v is the luminous efficacy in lumens/watt. figure 1. relative intensity vs. wavelength. figure 2. relative luminous intensity vs. forward current. w a vele n gt h ? n m r el a tive i n te n sity 350 400 450 500 550 600 650 1 . 00 c y an b l u e 0 0 . 80 0 . 60 0 . 40 0 . 20 g r ee n 0 1 . 5 0 . 3 r el a tive l u m i n o u s i n te n sity dc fo r w ard curr e n t ? m a 0 5 15 30 1 . 2 10 25 20 0 . 9 0 . 6
6 figure 5. relative dominant wavelength vs dc forward current. figure 3. forward current vs. ambient temperature. figure 4. forward current vs. forward voltage. figure 7. spatial radiation pattern ? 23 degree lamps. figure 6. spatial radiation pattern ? 15 degree lamps. fo r w ard curr e n t ? m a 0 0 a m b ie n t te m pe ra t ur e ? c 40 80 40 10 20 60 100 20 30 r j - a = 585 c /w r j - a = 780 c /w 0 30 10 03 . 0 20 2 . 0 1 . 0 fo r w ard curr e n t ? m a fo r w ard volt a ge ? v 4 . 0 c y an b l u e g r ee n dc fo r w ard curr e n t ? m a r el a tive d o m i nan t w a vele n gt h ( n o r m a lize d a t 20 m a ) 0102030 1 . 020 c y an 0 . 995 1 . 015 1 . 010 1 . 005 1 . 000 g r ee n b l u e r el a tive l u m i n o u s i n te n sity 1 0 an g u l ar d ispl ac e m e n t ? d eg r ees 0 . 5 - 90 - 60 0 - 30 30 60 90 r el a tive l u m i n o u s i n te n sity 1 0 an g u l ar d ispl ac e m e n t ? d eg r ees 0 . 5 - 90 - 60 0 - 30 30 60 90
7 figure 8. spatial radiation pattern ? 30 degree lamps. r el a tive i n te n sity 1 0 an g u l ar d ispl ac e m e n t ? d eg r ees 0 . 5 - 90 - 60 0 - 30 30 60 90 intensity bin limit table intensity (mcd) at 20 ma bin min max n 680 880 p 880 1150 q 1150 1500 r 1500 1900 s 1900 2500 t 2500 3200 u 3200 4200 v 4200 5500 w 5500 7200 x 7200 9300 y 9300 12000 z 12000 16000 1 16000 21000 tolerance for each bin limit is 15%. blue color bin table bin min. dom max. dom xmin. ymin. xmax. ymax. 1 460.0 464.0 0.1440 0.0297 0.1766 0.0966 0.1818 0.0904 0.1374 0.0374 2 464.0 468.0 0.1374 0.0374 0.1699 0.1062 0.1766 0.0966 0.1291 0.0495 3 468.0 472.0 0.1291 0.0495 0.1616 0.1209 0.1699 0.1062 0.1187 0.0671 4 472.0 476.0 0.1187 0.0671 0.1517 0.1423 0.1616 0.1209 0.1063 0.0945 5 476.0 480.0 0.1063 0.0945 0.1397 0.1728 0.1517 0.1423 0.0913 0.1327 tolerance for each bin limit is 0.5 nm. green color bin table bin min. dom max. dom xmin. ymin. xmax. ymax. 1 520.0 524.0 0.0743 0.8338 0.1856 0.6556 0.1650 0.6586 0.1060 0.8292 2 524.0 528.0 0.1060 0.8292 0.2068 0.6463 0.1856 0.6556 0.1387 0.8148 3 528.0 532.0 0.1387 0.8148 0.2273 0.6344 0.2068 0.6463 0.1702 0.7965 4 532.0 536.0 0.1702 0.7965 0.2469 0.6213 0.2273 0.6344 0.2003 0.7764 5 536.0 540.0 0.2003 0.7764 0.2659 0.6070 0.2469 0.6213 0.2296 0.7543 tolerance for each bin limit is 0.5 nm.
www.agilent.com/semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (916) 788-6763 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152(domestic/international), or 0120-61-1280(domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philip- pines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ? 2003 agilent technologies, inc. obsoltetes 5988-9268en october 15, 2003 5989-0169en cyan color bin table bin min dom max dom xmin. ymin. xmax. ymax. 1 490.0 495.0 0.0454 0.2945 0.1164 0.3889 0.1318 0.3060 0.0235 0.4127 2 495.0 500.0 0.0345 0.4127 0.1057 0.4769 0.1164 0.3899 0.0082 0.5384 3 500.0 505.0 0.0082 0.5384 0.1207 0.5584 0.1057 0.4769 0.0039 0.6548 4 505.0 510.0 0.0039 0.6548 0.1097 0.6251 0.1027 0.5584 0.0139 0.7502 7 498.0 503.0 0.0132 0.4882 0.1028 0.5273 0.1092 0.4417 0.0040 0.6104 8 503.0 508.0 0.0040 0.6104 0.1056 0.6007 0.1028 0.5273 0.0080 0.7153 tolerance for each bin limit is 0.5 nm.
|
